Recursos - Notas de Aplicações
Automated Monitoring of Protein Expression and Metastatic Cell Migration using 3D Bioprinted Colorectal Cancer CellsDownload
Related Products: Leitor multimodal com captura de imagens de células Cytation 5
September 23, 2016
Related Sample File: n3D Cell Migration
Related Video: HCT116 Uninhibited Cell Migration
Authors: Brad Larson, Leonie Rieger, BioTek Instruments, Inc., Winooski, VT USA; Glauco Souza and Hubert Tseng, Nano3D Biosciences, Inc., Houston, TX USA; Arun Kumar, Enzo Life Sciences, Farmingdale, NY USA
Colorectal cancer (CRC) is one of the most common cancer types in the U.S., with the National Cancer Institute estimating almost 1.2 million people nationwide living with the disease as of 2013, and over 134,000 new cases expected in 20161. For patients with advanced stages of CRC, there is a meager survival rate due to the cancer’s predisposition to metastasize and resist treatment therapies. Previous studies have shown that the two complexes of the serine/threonine kinase mammalian target of rapamycin (mTOR), mTORC1 (containing RAPTOR) and mTORC2 (containing RICTOR) are overexpressed in CRC and play a role in tumorigenesis, and metastasis2, 3. Furthermore, upregulation of the mTOR signaling pathway has also been shown to induce expression of matrix metalloproteinases (MMPs), which also play a role in CRC metastagenicity4. Therefore, development of therapies that incorporate mTOR inhibitors may reduce the metastatic potential of this cancer and improve survival rates.
As colorectal cancers are solid tumors that grow in vivo in a three dimensional (3D) configuration, a major limitation in the vast number of studies involving CRC research is the use of cells cultured onto a two-dimensional (2D) surface. Furthermore, cell metastatic behavior is often studied in vitro using phenotypic cell migration and target-based mechanism of action models. Specifically to the presented study, mTOR signaling is known to play a role in cell migration and ECM formation, which also leads to downstream expression of MMPs. The use of a 2D solid surface environment common to traditional labware results in altered cellular morphologies and behavior, as well as a lack of complex cell-cell or cell-extracellular matrix (ECM) interaction networks which often influences cell function, ECM production, and cell migration. 3D cell cultures remedy these shortcomings by providing a method that enables cells to reorganize and migrate into a structure that better replicates an in vivo microenvironment by capturing cell-cell and cell-ECM interactions. This development provides an improved predictive in vitro model for cancer metastasis.
Here, we demonstrate a magnetic 3D bioprinting cell culture platform (Figure 1), where cells are first incubated with a biocompatible magnetic nanoparticle assembly consisting of gold, iron oxide and poly-L-lysine, which magnetizes the cells without eliciting deleterious biological effect. The cells are then placed into a microplate well and levitated by placing a magnet above the well, where they aggregate and form ECM within a few hours. After this initial levitation step, the magnet is removed, and the 3D aggregates are dissociated into a disperse cell suspension of single cells and small cell aggregates by gentle pipetting action. Cells are then transferred to a 384-well assay plate and a spheroid magnet is positioned below the plate for an appropriate incubation period, allowing the cells within each well to be patterned into a dot or spheroid configuration depending upon the experiment being performed. Moreover, the magnetized spheroid can be held intact while exchanging liquids to improve sample retention, such as during regular media exchanges.
Figure 1. BiO Assay Kit protocol. The 384-Well BiO Assay Kit uses the NanoShuttle-PL nanoparticle assembly to (A.) magnetize cells. After incubation, (B.) cells are detached, resuspended in a cell-repellent plate, and magnetically levitated to aggregate and induce ECM. After breaking up the aggregates, (C.) single cells are transferred to a 384-well cell-repellent plate placed atop a 384-well magnet, where they aggregate at the well bottom.
Following removal of the magnet, protein expression within spheroid models was quantified via immunofluorescence, while rates of phenotypic cell migration were assessed using kinetic live cell brightfield imaging to track cell and ECM movement away from the original pattern. Mechanism of action and tumorigenesis were also determined by microplate reading and fluorescent imaging, respectively. Normal and cancerous co-cultured colon cell models were incorporated to test protein expression, whereas cell migration was analyzed using HCT116 colorectal cancer cells only. Automated imaging and microplate reading were performed using a novel cell imaging multi-mode reader. The combination of 3D cell model and image-based analysis provides easy-to-use, robust methods to quantify protein expression and 3D cell migration allowing confirmation of the role that mTOR signaling plays in the development and treatment of colorectal cancer.
Materials and Methods
HCT116 epithelial colorectal carcinoma cells (Catalog No. CCL-247) and CCD 841 CoN colon epithelial cells (Catalog No. CRL-1790) were obtained from ATCC (Manassas, VA). RFP expressing human neonatal dermal fibroblasts (Catalog No. cAP-0008RFP) were obtained from Angio-Proteomie (Boston, MA).
Antibodies and Inhibitor Compounds
Rabbit anti-human mTOR polyclonal antibody (Catalog No. ADI-905-687), mouse anti-human raptor monoclonal antibody (10E10) (Catalog No. ADI-905-765), mouse anti-human rictor monoclonal antibody (1G11) (Catalog No. ADI-905-766), goat anti-mouse IgG1 (ATTO 590 conjugate) (Catalog No. ALX-211-204TM-C100), and goat anti-mouse IgG (ATTO 647N conjugate) (Catalog No. ALX-211-205); and inhibitor compounds rapamycin (Catalog No. BML-A275), KU-0063794 (Catalog No. ENZ-CHM135) and oxaliplatin (Catalog No. ALX-400- 042) were generously donated by Enzo Life Sciences (Farmingdale, NY). Donkey anti-rabbit IgG H&L (Alexa Fluor® 647) polyclonal antibody (Catalog No. ab150075) was obtained by abcam (Cambridge, MA).
Assay and Experimental Components
The 384-Well BiO Assay™ Kit (GBO Catalog No. 781846, consisting of 2 vials NanoShuttle™-PL, 6-Well Levitating Magnet Drive, 384-Well Spheroid and Holding Magnet Drives (2), 96-Well Deep Well Mixing Plate, 6-Well and 384-Well Clear Cell Repellent Surface Microplates), prototype 384-Well Ring Drive and additional Cell Repellent Surface 6-Well (GBO Catalog No. 657860) and 384-Well Black μClear Microplates (GBO Catalog No. 781976), were generously donated by Nano3D Biosciences, Inc., (Houston, TX) and Greiner Bio-One, Inc., (Monroe, NC). Matrix Metalloproteinase-9 (MMP-9) fluorometric drug discovery kit (Catalog No. BML-AK411), and chemiluminescent ApoSENSOR™ Cell Viability Assay Kit (Catalog No. ALX-850-247) were donated by Enzo Life Sciences.
Cytation 5 is a modular multi-mode microplate reader combined with automated digital microscopy. Filter- and monochromator-based microplate reading are available, along with laser-based excitation for Alpha assays. The microscopy module provides up to 60x magnification in fluorescence, brightfield, color brightfield and phase contrast. With special emphasis on live cell assays, Cytation 5 features shaking, temperature control to 65 °C, CO2/O2 gas control and dual injectors for kinetic assays. The instrument performed kinetic imaging of the 3D cell structure using brightfield and multiple fluorescent imaging channels. Integrated Gen5™ Microplate Reader and Imager Software controls Cytation 5, and also automates image capture, analysis and processing.
T-75 flasks of HCT116, human colon, or fibroblast cell cultures were cultured to 60% confluence, then treated with 600 μL NanoShuttle-PL overnight at 37 ºC/5% CO2. After incubation, cells were trypsinized, washed, and incubated for 3-5 minutes at 37 ºC/5% CO2. Cells were removed from the flasks and added to the 6-well cell repellent plate at a concentration of 1.2x106 cells/well. A 6-well magnet drive was placed atop the well plate to levitate the cells, where they aggregated into 3D structures and induced ECM formation during an eight hour incubation at 37 ºC/5% CO2. After incubation, the cells and ECM were broken up, resuspended and added to 384-well cell repellent plate wells. For protein expression experiments, cells were resuspended at a total concentration of 2.0x105 cells/mL, and a total of 10,000 cells were dispensed in a volume of 50 μL. Tests involving co-cultured fibroblasts and colon cells included combining cell types in a 1:1 ratio so that 10,000 total cells were dispensed in the 50 μL volume. For cell migration experiments, cells were resuspended at a total concentration of 2.22x105 cells/mL, and a total of 10,000 cells were dispensed in a volume of 45 μL. A 384-well spheroid magnet drive was placed below the test plates, and the assembly was incubated at 37 ºC/5% CO2 for 48 hours to allow cells within each well to aggregate into spheroids for protein expression assessment. Assembly incubation totaled 1.5 hours for migration tests to create an epithelial layer-like dot configuration of cells and ECM.
Following completion of the aggregation process, protein expression plates were removed from the spheroid magnet drive. Migration plates remained on the spheroid drive where 5 μL of 10X titrations of rapamycin or KU-0063794 were added to the wells prior to removal of the plate from the magnet drive.
Protein Expression Assay Procedure
Immunofluorescent staining was performed with HCT116/fibroblast and normal colon/fibroblast co-culture spheroid models using the procedure outlined in Table 1. Expression of mTOR, RAPTOR, and RICTOR protein in each model was assessed using the specific primary and secondary antibodies detailed in Table 2.
Table 1. Spheroid Fixing and Staining Procedure
Table 2. Protein Primary and Secondary Antibodies.
Following completion of the immunostaining procedure, the plate was imaged by the Cytation 5 using a 10x objective, 2x2 image montage, and the brightfield channel to image all cells, RFP channel to image fibroblasts, and either the CY5 channel to capture the Alexa Fluor 647 and ATTO 647N signal or the Texas Red channel to capture the ATTO 590 signal.
Cell Migration Assay Procedure
384-well microplates were placed into Cytation 5 where automated brightfield imaging was performed every 30 minutes over a 48 hour incubation period. A 2.5x objective was used to capture single images from each test well.
ApoSENSOR assay components were prepared according to manufacturer protocols. The 384-well microplate was placed on the holding magnet drive and media removed via pipetting. 50 μL of Nuclear Releasing Reagent was then added followed by mixing by pipette and a 5 minute incutation at RT. 5 μL of ATP Monitoring Enzyme was then added to the wells, and the microplate was placed into Cytation 5 where the luminescent signal from each well was measured.
The 400 μM DMSO stock of OmniMMP fluorogenic substrate peptide was thawed and diluted 1:10 in cell media. Test compounds and the no compound control were diluted in the media plus 40 μM substrate. 5 μL volumes were then added to the existing 45 μL and the microplate placed into Cytation 5. Fluorescent signal from the cleaved substrate was measured by setting the monochromators to an excitation wavelength of 328 nm and an emission wavelength of 420 nm along with a 20 nm bandwidth. Readings were taken at the same intervals previously described for the cell migration assay procedure.
Results and Discussion
Upon completion of antibody staining, fluorescent imaging was completed to capture the fluorescent signal from protein bound antibody. Brightfield and fluorescent imaging was also carried out to identify the location of both cell types within the co-cultured spheroids and RFP expressing fibroblasts, respectively (Figure 2).
Figure 2. Detection and analysis of protein bound immunofluorescence. (A.) Brightfield, RFP, CY5 overlaid image of HCT116/RFP expressing fibroblast spheroid; (B.) Overlaid image plus Gen5 placed object mask around spheroid structure; (C.) Brightfield, RFP, CY5 overlaid image of normal colon/RFP expressing fibroblast spheroid; (D.) Overlaid image plus Gen5 placed object mask around spheroid structure.
Initial observation of overlaid brightfield, RFP, and CY5 images revealed variances in cellular organization between colon epithelial cells and fibroblasts in normal and diseased spheroidal models. HCT116 cells and fibroblasts organize in a mutually exclusive manner where the cancer cell line layers on top of a fibroblast core (Figure 2A). Conversely, normal colon cells and fibroblasts organize in an inclusive way that promotes even distribution of each cell type within the spheroid (Figure 2C).
Protein expression was then determined within each spheroid. Object masks were placed around the spheroidal object using the change in contrast in the brightfield signal between cellular and background areas. The object mask allowed quantification of all immunofluorescence solely within the spheroid area using the “Object Int” calculated metric. Integrated CY5 fluorescence from test spheroids for each co-cultured cell model were then tabulated.
Figure 3. Protein expression quantification. Fluorescent signal from labeled secondary antibodies bound to primary antibodies specific for mTOR; RAPTOR; or RICTOR proteins. Signal ratio calculated by comparing the signal from HCT116 cells/fibroblasts to normal colon cells/fibroblastst.
Figure 3 illustrates that mTOR, RAPTOR, and RICTOR protein expression was increased by as much as eight fold in diseased colon epithelial cell spheroid models compared to normal colon cell spheroids. This confirms previously published findings that expression of mTOR and its components RAPTOR and RICTOR are greatly increased in colorectal cancers3, and suggests that the 3D co-cultured HCT116/fibroblast spheroidal model is a suitable surrogate to perform in vitro testing.
The ability of bioprinted cells to demonstrate metastatic behavior by means of cell migration, as well as the image- based monitoring and analysis to properly quantify the migration was then examined. Using the parameters in Table 3, the images were pre-processed to improve appropriate placement of object masks around the complete migrating structure during the cellular analysis step. As seen when comparing Figures 4A and 4B, the change in intensity from the middle of the brightfield image to the outer edge is removed, or flattened providing an image of satisfactory contrast where the cellular aggregate is much easier to analyze.
Table 3. Brightfield image pre-processing parameters.
Figure 4. Image background signal removal via pre-processing. Representative brightfield image, using a 2.5x objective (A.) before; and (B.) after pre-processing.
Upon examination of the kinetic brightfield images of uninhibited cell and ECM migration in Figure 5, captured using the parameters previously explained, it can be seen that both cells and matrix move away from the original printed area over time to cover an increasing portion of the well. Migration is then completely inhibited by 10 μM concentrations of rapamycin or KU-0063794, compounds known to inhibit cell signaling pathways leading to mTOR activation.
Figure 5. HCT116 cell migration over forty-eight hour incubation. Brightfield images, using a 2.5x objective, captured from individual wells of HCT116 cells treated and incubated as follows: (Row 1) untreated, 0-48 hours; (Row 2) 10 μM rapamycin, 0-48 hours; (Row 3) 10 μM KU-0063794, 0-48 hours.
Once all images were pre-processed, detailed object masks using the change in brightfield signal, as well as other parameters detailed in Table 4, were automatically and accurately placed around the migrating 3D structure composed of cells and ECM as demonstrated in Figure 6.
Table 4. Brightfield image object masks parameters.
Figure 6. Cellular analysis. (A.) Pre-processed brightfield image, using a 2.5x objective, with object mask automatically placed around cells and ECM using Gen5 Software. Line drawn through background and cell and ECM containing portions of the image by Line Profile Tool. (B.) Graph of brightfield signal along all portions of drawn line representing signal change used by Gen5 to automatically construct object mask.
Area within each 3D structure was automatically returned by Gen5 as a calculated metric at each time point for the 0-10,000 nM concentrations of rapamycin and KU-0063794 tested. Then fold change values were calculated by the following formula and graphed (Figure 7).
AreaTime X / AreaTime 0
Figure 7 demonstrates that both rapamycin and KU-0063794 have a dose dependent effect on the migratory ability of HCT116 cells. The results also confirm published findings that inhibition of mTOR signaling attenuates migration of CRCs3. A more complete inhibitory effect is seen from KU-0063794 at the 10 μM concentration compared to rapamycin. This may be due to the fact that rapamycin inhibits only mTORC1 in an acute manner, but has little effect on mTORC25, whereas KU-0063794 is a known inhibitor of both mTOR complexes6.
Figure 7. Kinetic HCT116 cell migration analysis. Area fold change of cells exposed to 0-10,000 nM (A.) rapamycin; or (B.) KU-0063794 compared to coverage area at time 0.
Relative cell viability was also measured pre- and postincubation to assess whether the change in cell and ECM coverage area was due to actual cell migration or to cell proliferation. ApoSENSOR reagent, which measures cellular ATP levels, was added to wells containing untreated HCT116 cells and matrix, incubated at hours 0 and 48, following the manufacturer’s protocol. Luminescent signal from test wells was captured and quantified using Cytation 5. Statistical analysis (data not shown), using a t-test on luminescent data generated before and after the 48-hour incubation period, revealed no significant change between the two data sets with greater than 99% confidence. This confirms that the change in cell/ECM coverage area is not due to cell proliferation, but rather due to existing cell migration.
Matrix Metalloproteinase Mechanism of Action
Matrix metalloproteinase (MMP) production, which is regulated by the mTOR signaling pathway, is shown to play a role in the invasive and migratory ability of CRCs. MMPs are typically active at the leading edge of invasive structures where they degrade ECM proteins and facilitate the first part of the metastatic process.
With the addition of the live cell fluorogenic MMP-9 substrate to each test well at time 0, it could be determined if inhibition of the mTOR signaling pathway by rapamycin or KU-0063794 not only played a role in the interruption of phenotypic cell migration, but also in MMP-9 production.
Figure 8. Detection of MMP-9 activity. Plot of Δ RFU values upon cleavage of fluorogenic MMP-9 substrate after 0 and 24 hours incubations from wells treated with rapamycin or KU-0063794. Fluorescent signal captured by Cytation 5 using monochromator settings of Ex. 328 and Em. 420 with a 20 nm bandwidth.
Increases in MMP-9 activity, as indicated by increasing fluorescence values from test wells, stabilized after 24 hours of incubation. The change in fluorescence from RFU values recorded at time 0 for each individual well at this time point were then plotted in the graph seen in Figure 8. By observing the results, it can be seen that Δ RFU values decrease with increasing concentrations of rapamycin and KU-0063794, indicating a dose dependent inhibitory effect on MMP-9 enzyme activity. This data validates results previously reported that knockdown of RAPTOR and RICTOR proteins decreases levels of MMP-9 secretion3.
The 384-Well BiO Assay Kit and NanoShuttle-PL particles manufactured by nano3D Biosciences provide a simple, robust method to create biomimetic, ECM-including structures that resemble a primary tumor. This facilitates the accurate assessment of changes in protein expression between normal and diseased 3D cell models, and the effect that inhibiting cell signaling pathways have on metastatic cell migration. In the CRC model chosen, we have demonstrated that mTOR and its protein complexes involving RAPTOR and RICTOR are highly overexpressed relative to undiseased co-cultured cells. This is linked to significant cell migration in the 3D bioprinted model used that is aided by matrix metalloproteinase production. Using known inhibitors of mTOR protein complexes, cell migration can be impeded or completely stopped over the time course of our experiments. This is in part due to reduction of matrix metalloproteinase activity.
- National Cancer Institute Surveillance, Epidemiology, and End Results Program. http://seer.cancer.gov/statfacts/ html/colorect.html (accessed Aug 5, 2016).
- Gulhati, P.; Cai, Q.; Li, J.; Liu, J.; Rychahou, P.G.; Qiu, S.Lee, E.Y.; Silva, S.R.; Bowen, K.A.; Gao, T.; Evers, B.M. Targeted inhibition of mTOR signaling inhibits tumorigenesis of colorectal cancer. Clin Cancer Res. 2009, 15(23), 7207-7216.
- Gulhati, P.; Bowen, K.A.; Liu, J.; Stevens, P.D.; Rychahou, P.G.; Chen, M.; Lee, E.Y.; Weiss, H.L.; O’Connor, K.L.; Gao, T.; Evers, B.M. mTORC1 and mTORC2 regulate EMT, motility and metastasis of colorectal cancer via RhoA and Rac1 signaling pathways. Cancer Res. 2011, 71(9), 3246-3256.
- Wang, G.; Wang, F.; Ding, W.; Wang, J.; Jing, R.; Li, H.; Wang, X.; Wang, Y.; Wang, H. APRIL induces tumorigenesis and metastasis of colorectal cancer cells via activation of the PI3K/Akt pathway. PLoS One [Online] 2013, 8(1) http://journals.plos.org/plosone/ article?id=10.1371/journal.pone.0055298 (accessed Sep 9, 2016).
- Schreiber, K.H.; Ortiz, D.; Academia, E.C.; Anies, A.C.; Liao, C.; Kennedy, B.K. Rapamycin-mediated mTORC2 inhibition is determined by the relative expression of FK506-binding proteins. Aging Cell 2015, 14(2), 265-273.
- Zhang, H.; Berel, D.; Wang, Y.; Li, P.; Bhowmick, N.A.; Figlin, R.A.; Kim, H.L. A comparison of Ku0063794, an dual mTORC1 and mTORC2 inhibitor, and temsirolimus in preclinical renal cell carcinoma models. PLoS One [Online] 2013, 8(1) http://journals.plos.org/plosone/ article?id=10.1371/journal.pone.0054918 (accessed Sep 12, 2016).